D-Link DCS-900W ユーザーズマニュアル
17
Web Configuration
After completing the Setup Wizard, you are ready to use your camera. The Web
configuration utility is designed to easily access and configure your DCS-900W.
configuration utility is designed to easily access and configure your DCS-900W.
If you would like to open the configuration page from a Web Browser, enter the IP
address that you assigned to your DCS-900W.
address that you assigned to your DCS-900W.
Note:
The PC’s IP address must correspond with the DCS-900W’s IP address in the same
segment (i.e. PC=192.168.0.5, Camera=192.168.0.20) for the two devices to
communicate. For instructions on how to do this, please access instructions for
installing any of the D-Link Broadband Gateway products from support.dlink.com/
products.
segment (i.e. PC=192.168.0.5, Camera=192.168.0.20) for the two devices to
communicate. For instructions on how to do this, please access instructions for
installing any of the D-Link Broadband Gateway products from support.dlink.com/
products.
Home Screen
After the camera’s IP address is entered in the Browser, the DCS-900W Home screen
will appear with a still image from your camera. There will be three options to choose
from to set up and view your Internet Camera:
will appear with a still image from your camera. There will be three options to choose
from to set up and view your Internet Camera:
!
ActiveX
!
Java
!
Setup
DCS-900W Configuration