Denso ofice pro 36 ユーザーズマニュアル
17
OPERATION (cont.)
Set Clock
Prior to operating the Office Pro 36 or Office Pro 60 users should set the clock of
the controller to the correct time as shown in the steps below.
the controller to the correct time as shown in the steps below.
1. Press and hold the SET CLOCK button
for 3 seconds or until beep.
(LCD indicates blinking “CLOCK” and
blinking “day of the week”.)
(LCD indicates blinking “CLOCK” and
blinking “day of the week”.)
2. Press SET TEMP buttons to select day
of the week.
3. Press ENTER button to set hour.
4. Press SET TEMP buttons to select
desired hour.
5. Press ENTER button to set minute.
6. Press SET TEMP buttons to select
desired minute. Press SET CLOCK
button to exit set clock mode.
button to exit set clock mode.
Note: User should check clock periodically to confirm clock accuracy.
Operating in COOL Mode
1. The unit can be operated in COOL mode by pressing the COOL ON/OFF
button (LCD indicates “COOL ON”).
Note: In COOL mode the unit can only be turned off by pressing the COOL
ON/OFF button again, not by pressing the fan buttons.
ON/OFF button again, not by pressing the fan buttons.
2. Change the fan speed by pressing the FAN HI/LO button.
3. Change the temperature set point by pressing the SET TEMP buttons (
/
).
Note: When turning the unit on, the set point and fan speed are determined by
the last operating mode. (This function does not apply to PROGRAM mode.)
the last operating mode. (This function does not apply to PROGRAM mode.)
Step 1 & 6
Step 2 to 5