Denso ofice pro 36 ユーザーズマニュアル

Office Pro 36 and Office Pro 60 operate in 2 modes, FAN ONLY and COOL. When 
in FAN ONLY mode, the unit circulates the surrounding air, Office Pro 60 is 
equipped with an automatic fan speed control when operating in FAN ONLY 
mode. When in COOL mode, the compressor is operational and cool air is 
circulated. Both Office Pro 36 and Office Pro 60 are equipped with automatic 
condenser fan speed control depending on room temperature.

Office Pro 36 and Office Pro 60 operate in FAN ONLY mode for approximately 120 
seconds before the compressor engages. 
(Time delay setting is around 120 seconds.)

The room temperature thermistor allows the unit to switch automatically between 
COOL and FAN ONLY modes. This is dependent upon inlet air temperature versus 
set point temperature.

The fan mode control DIP switch determines whether the fan continues to operate 
or stop when the compressor cycles off. (Set point temperature equals inlet air or 
room temperature.) The unit has been preset at the factory for continuous fan 
operation.

The temperature scale display DIP switch changes the temperature(s) that are 
displayed to either °C or °F. The unit has been preset from the factory to display the 
temperature(s) in °F.