culligan us-550 ユーザーズマニュアル

Replacement Parts

1 151039

Pressure-Relief Assembly

2 154159

White Cap 

3 151121

o-ring (OR-38)

4 153049

Opaque Housing 

5 150294

SW-1 Housing Wrench
(not included) not shown

For replacement parts, contact your nearest retailer or call
Culligan Consumer Services at 1-888-777-7962.

Performance Data

Important Notice: Read this performance data and compare the capabilities of
this system with your actual water treatment needs. It is recommended that, before
installing a water treatment system, you have your water supply tested to deter-
mine your actual water treatment needs.
This system has been tested according to NSF/ANSI 42 and 53 for reduction of the
substances listed below.  The concentration of the indicated substances in water 
entering the system was reduced to a concentration less than or equal to the per-
missible limit for water leaving the system, as specified in NSF/ANSI 42 and 53.

Substance

Influent Challenge

Max. Permissible Product

Reduction

Minimum

Average

Concentration

Water Concentration

Requirements

Reduction

Reduction

Chlorine

2.0 mg/L ± 10%

≥ 50%

95%

Particulates

at least 10,000 particles/mL

≥ 85%

>85%

(1 to < 5 µm)
Class II

Flow Rate = 1 gpm (3.78Lpm)Capacity = 250 gallons (946 L) or 3 months

Substance

Influent Challenge

Max. Permissible Product

Reduction

Minimum

Average

Concentration

Water Concentration

Requirements

Reduction

Reduction

Chlorine

2.0 mg/L ± 10%

≥ 50%

89%

Flow Rate = 1 gpm (3.78 Lpm)Capacity = 1000 gallons (3785 L) or 12 months

Substance

Influent Challenge

Max. Permissible Product

Reduction

Minimum

Average

Concentration

Water Concentration

Requirements

Reduction

Reduction

Chlorine

2.0 mg/L ± 10%

≥ 50%

97%

Particulates

at least 10,000 particles/mL

≥ 85%

96%

(0.5 to < 1µm)
Class I

Cysts2)

Minimum 50,000/L

99.95%

99.99%

99.99%

Turbidity

11 ± 1 NTU

0.5 NTU

95.4%

97.4%

Asbestos

10

7

to 10

8

fibers/L >10

99%

99.95%

99.95%

Micrometers in length

Flow Rate = 0.9 gpm (3.4 Lpm)Capacity = 1000 gallons (3785 L) or 12 months

Substance

Influent Challenge

Max. Permissible Product

Reduction

Minimum

Average

Concentration

Water Concentration

Requirements

Reduction

Reduction

Chlorine

2.0 mg/L ± 10%

≥ 50%

97%

Particulates

at least 10,000 particles/mL

≥ 85%

96%

(0.5 to < 1µm)
Class I

Cysts2)

Minimum 50,000/L

99.95%

99.99%

99.99%

Turbidity

11 ± 1 NTU

0.5 NTU

95.4%

97.4%

Asbestos

10

7

to 10

8

fibers/L >10

99%

99.95%

99.95%

Micrometers in length

Lead 6.5 pH

0.15 mg/L ± 10%

0.010 mg/L

99.3%

99.3%

Lead 8.5 pH

0.15 mg/L ± 10%

0.010 mg/L

94.1%

97.6%

Mercury 6.5 pH

0.006 mg/L ± 10%

0.002 mg/L

72%

88.5%

Mercury 8.5 pH

0.006 mg/L ± 10%

0.002 mg/L

95%

96.7%

Atrazine

0.009 mg/L ± 10%

0.003 mg/L

91.8%

93.8%

Lindane

0.002 mg/L ± 10%

0.0002 mg/L

97.3%

97.3%

Flow Rate = 0.6 gpm (2.27 Lpm)Capacity = 600 gallons (2271 L) or 6 months

2) Based on the use of microspheres or Cryptosporidium parvum oocysts
Testing was performed under standard laboratory conditions, actual performance may vary.

Store or seller’s name

Address

City

State

Zip

Telephone

Seller’s signature

Customer’s signature

Date

4

This warranty applies to the Culligan US-550 Filter Housings only. It does NOT apply to any dis-
posable filter cartridge, which has a life expectancy that varies with the water being filtered. This
warranty covers defects in materials and workmanship only for five full years from original date of
delivery. Culligan will replace any part which in Culligan’s opinion is defective, unless: (1) any
part of the system has been subjected to any type of tampering, alteration, or improper use after
delivery, or (2) any part of the system has been repaired by anyone not approved by Culligan.
Our obligation does not include the cost of shipment of materials. Culligan is not responsible for
damage in transit, and claims for such damage should be presented to the carrier by the 
customer. 

This product has been designed solely for use as a housing for a disposable filter cartridge. It is
NOT warranted against freezing, and neither this product nor its parts is warranted against
defects or deterioration caused by uses for which this product was not expressly intended. 

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, WHETHER ORAL OR ARISING BY USAGE OF TRADE OR COURSE OF
DEALING, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF FITNESS OR 
MERCHANTABILITY. THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. IN NO
EVENT SHALL CULLIGAN. BE LIABLE FOR ANY ANTICIPATED OR LOST PROFITS, INCIDENTAL 
DAMAGES, CONSEQUENTIAL CHARGES OR OTHER LOSSES, WHETHER BASED ON BREACH OF
CONTRACT, TORTIOUS CONDUCT OR ANY OTHER THEORY, INCURRED IN CONNECTION WITH THE
PURCHASE, INSTALLATION, REPAIR OR OPERATION OF THE OPAQUE FILTER HOUSING. CULLIGAN
DOES NOT AUTHORIZE ANYONE TO ASSUME FOR IT ANY LIABILITY OR MAKE ON ITS BEHALF ANY
ADDITIONAL WARRANTIES IN CONNECTION WITH THE OPAQUE FILTER HOUSING OR ANY PART
THEREOF. 

For servicing under this warranty, return any defective part to YOUR RETAILER within the five-year
period referred to above. 

International: Phone (920) 457-9435 • Fax (920) 457-2417 

e-mail: customerservice@culligan.com

P.O. Box 1086 • Sheboygan, WI 53082-1086

Fax (847) 291-7632

e-mail: sales-marketing@culligan.com

©2003 Culligan International Company, Printed in U.S.A. 

11/03   145765   Rev C

One Culligan Parkway

Northbrook, Illinois 60062

www.culligan.com