CMS Products 674 ユーザーズマニュアル

Hot Drink Setup

HotCup Operators’ Guide

6740001

November, 2007

SET THE BOWL RINSE TIME

Mixing bowl(s) can be automatically rinsed by one of two methods: You can specify a set time of day
when the bowl is rinsed, or you can specify that rinsing takes place a set time after the last selection
is vended.1.

a. Press

then

until the display shows one of the following:

RIN.HRS 2.5

- This is how soon the machine rinses the bowls after a vend. In this example,

bowl rinse takes place 2.5 hours after the last vend. Range: 2.0 - 12.5 hours, in .1 hour (6
minute) increments.

-or-

RIN.TIM 4.5

- The time of day (in hours and tenths of hours) the machine rinses the bowls.

In this example, bowl rinse takes place at 4:30 am. Range: 0.0 - 23.9 in .1 hour (6 minute)
increments.

NOTE:

If 24 hours passes without a vend, no rinsing will take place. This

eliminates unnecessary rinsing over a weekend or holiday.

-or-

RINSE OFF

- No bowl rinse takes place.

b. Press

to switch between these options, and the number keys to enter new values.

c. Continue.

CLEAR TANK ERRORS AND FILL THE TANK

a. Press

, then press

until the display shows

TANK FILL

b. Press

. This clears any tank error and starts filling the tank, if necessary. If it is taking

a long time to fill the tank AND THERE ARE NO LEAKS, you may see

TANK ERR

in the

diagnostic list again. Just press

again after making sure there are no other problems,

such as a restriction in the water inlet line or a clogged water filter.

c. Continue.