D-Link DES-3250TG ユーザーズマニュアル

From and To 

Ports being configured for 802.1x 
settings. 

Two role choices can be selected: 

Authenticator 

− A user must pass the 

authentication process to gain access to 
the network. 

None 

− The port is not controlled by the 

802.1x functions. 

Existing 802.1x port settings are displayed and can be configured using the window below. 

Click Initialize Port(s) on the PAE Access Entity folder on the Configuration menu to open the Initialize Port window: 

 

This window allows you to initialize a port or group of ports. The Initialize Port Table in the bottom half of the window 
displays the current status of the port(s) once you have clicked Apply.     

This window displays the following information: 

The port number. 

The MAC address of the switch where 
the port resides. 

The Authenticator PAE State will display 
one of the following: Initialize, 
Disconnected, 

Connecting, 

Authenticating,  Authenticated,  Aborting, 
Held, ForceAuth, ForceUnauth, and N/A. 

The Backend Authentication State will 
display one of the following: Request, 
Response,  Success,  Fail,  Timeout,  Idle, 
Initialize, and N/A. 

The Operational Controlled Directions 
are both and in. 

The status of the controlled port can be 
authorized, unauthorized, or N/A.