Microtek gnc m vx2 0506 ユーザーズマニュアル

If a video image is being displayed, you may adjust the color

intensity and tint settings on the VIDEO menu.

Check whether the audio output is in the Mute status. Press

the 

 button on the operation panel.

Check to ensure that the volume is not turned all the way

down.

Check to ensure that the RCA Cable (Audio) is connected

securely to the Audio source and the projector.

Check to ensure that a wrong source has not been selected.

If so, press the 

 button on the operation panel or on

the remote control for a right selection.

This is normal because the input signal from a VHS is

unstable. Users are suggested to use S-video or component

input instead, if possible. Check to ensure that an extra-long

S-video cable is not being used.

                           

Check if the battery has run out of power, or replace with new

batteries.

When using the remote control, please take note that if the button on the remote

control is pressed, this can result in continuous release of power and cause great

power consumption.

ＶＸ２．ｐ６５

02-10-18, 11:05

48