Morphy Richards ib25014 ユーザーズマニュアル

Place the mirror on a hard, level

surface.

Plug in the power source.

Loosen the angle locking device

slightly and swivel mirror to either

standard reflection or triple

magnification.

Angle the mirror to suit and

tighten the angle locking device to fix

into place.

Plug the mirror into the electrical

socket and switch on at the on/off

switch on the power cord to produce

the light halo effect.

3

Ensure the appliance is switched

off and the plug has been removed

from the electrical socket.

Use a small screwdriver to remove

the two screws at the rim of the

mirror. Carefully remove the rim

section and replace the bulb inside

with a bulb of the same specification.

Replace the mirror rim section

aligning the screw holes exactly and

carefully replacing the screws.

Bulb specification - 240 volts 25 watt

Eddison small screw fitting

clear candle bulb