Radio Shack 660r ユーザーズマニュアル

ページ / 2
Yamaha Raptor 660R
60-4352
Installing the Batteries
You will need...
Six AA Batteries for the Raptor (not included)
One 9V Battery for the Transmitter
(not included)
Install Batteries in the Raptor
• Turn the vehicle off.
• Turn the latches on 
each side to remove 
the battery box.
• Insert six AA batteries 
in the battery box, 
matching the polarity 
symbols (+ and -) 
marked inside.
• Replace the battery 
box and engage the latches.
Install Batteries in the Transmitter
• Remove the battery 
compartment cover.
• Insert one 9V battery 
in the battery com-
partment, matching 
the polarity symbols 
(+ and -) marked 
inside.
• Replace the cover.
Driving the Raptor
• Extend the transmitter’s antenna to its 
full length.
• Turn the vehicle and transmitter on. 
The transmitter’s LED indicator
illuminates.
• Use the transmitter’s control levers to 
drive the Raptor.
• Turn the transmitter and vehicle off 
when you finish playing with them.
Left Control Lever
• Push forward to move forward.
• Pull backward to move backward.
• Release to stop.
Right Control Lever
• Push left to turn left.
• Push right to turn right.
• Release to make the vehicle go 
straight.
Step One
Step Two
Rock from side to side
Stunt Tips
Rockin’ Tilt - When moving 
forward or backward, the Raptor 
can rock from side to side by 
moving the right control lever 
rapidly from left to right.
The Big Wheelie - Pop big 
wheelies by driving backward and 
then quickly moving forward.
     Lever
Left Control
    Lever
LED
Indicator
Antenna
Right Control
On/Off
Switch
On/Off
Switch
Pop a Wheelie