Olympus camedia d-390 ユーザーズマニュアル

ページ / 4
 
Figure 1 
 
Wiring diagram for an external battery for the D-390.  It is recommended 
that you use a 3 cell battery holder.  This holder was constructed from a 
4 AA cell holder sold at Radio Shack. 
 
 
 
 
PixController Universal Board Wiring Information
 
Update 9/9/04   
 
Shown below are the locations for wiring to the PixContorller Universal Board. You may either 
solder your connections to the “Camera Port”, or use the enclosed Phone Cable and wire to the 
“Phone Jack Port”. 
 
Note: 
The included phone cable for the phone jack can come in 2 different types of 
configurations: Please make note if you have the Standard or Reverse Cable.
 
 
If the wiring for the phone line you have is BRGY 
  (Standard Cable) 
     
Black -> Shutter 
     Red -> Refresh 
     Green -> Power on/off 
     Yellow -> Common or Ground
 
 
If the wiring for the phone line you have is YGRB 
  (Reverse Cable) 
     
Yellow -> Shutter 
     Green-> Refresh 
     Red -> Power on/off 
     Black -> Common or Ground