ZyXEL Communications NWD-370N ユーザーズマニュアル
ZyXEL NWD-370N User’s Guide
20
Chapter 1 Getting Started
The following table describes the NWD-370N.
The following table describes the operation of the LEDs on the device.
1.2 Application Overview
This section describes some network applications for the NWD-370N. You can either set the
network type to Infrastructure and connect to an AP or use Ad-Hoc mode and connect to a
peer computer (another wireless device in Ad-Hoc mode).
network type to Infrastructure and connect to an AP or use Ad-Hoc mode and connect to a
peer computer (another wireless device in Ad-Hoc mode).
1.2.0.1 Infrastructure
To connect to a network via an access point (AP), set the NWD-370N network type to
Infrastructure. Through the AP, you can access the Internet or the wired network behind the
AP.
Infrastructure. Through the AP, you can access the Internet or the wired network behind the
AP.
Table 1 External View
LABEL
DESCRIPTION
A
Removable antennas
B
LEDs (lights)
C
PCI connector
Table 2 NWD-370N LEDs
STATE
DESCRIPTION
The LEDs are off
The NWD-370N is not receiving power.
The LEDs are blinking
alternately.
The NWD-370N is receiving power and is not connected to a
wireless network.
The LEDs are blinking
simultaneously and regularly.
The NWD-370N is receiving power and is connected to a wireless
network.
The LEDs are blinking
simultaneously and irregularly.
The NWD-370N is receiving power, is connected to a wireless
network and is sending or receiving data.