Zebra MC-802 557925-001-00 プリント
製品コード
557925-001-00
SPECIFICATION SHEET
micro-cell architecture
Analog telephone pass-thru
automatic RF management
Remotely powered by ALP
MC-802 Wireless WallPlate
MC-802 Wireless WallPlate
micro-cell wireless architecture designed for
hospitality, healthcare, and MDU
Motorola's patented Adaptive Line Power (ALP) delivers operating power to the MC-802 over
analog telephone service. Neutral colored wall plate snaps-on over the existing RJ11
telephone jack - converting it into a tamper proof wireline/wireless access point.
MobilityDuo software running on the T3 PowerBroadband Switch manages firmware and
automatic radio configuration including dynamic power control and 802.11 channel selection.
Continuous RF monitoring, rogue AP detection, self-healing configuration maintain high
network availability.
Enterprise class features; per-SSID VLANs, QoS, authentication and encryption. CLI, intuitive
webUI, SNMPv2C, ACLs, mgmt VLAN, and a network Node Viewer application..
Seamless Design
Micro-cell Mgmt
Enterprise Class
Common Problems ... eliminated by the MC-802
Placing wireless APs in hallway corridors is disruptive and
time consuming due to lack of available backhaul and
power. Hard-cap ceilings and concrete construction
makes installation of Cat-5 structured wiring prohibitively
expensive.
RF energy is reflected and obstructed by fire-rated doors
and walls, steel construction, elevator shafts, and mirrors.
Install MC-802 in the hotel guestroom where
backhaul wiring is already located, saving up to
80% on installation cost.
MC-802 puts the RF energy on the "guest side" of
the obstructions - right where it is needed.
The new Motorola MC-802 Wireless WallPlate is a plug-n-play wireless AP powered over telephone wires. Designed
to increase wireless coverage by deploying multiple low-powered wireless cells in MDUs such as hotels and hospitals.
MC-802 can be installed over any telephone jack using only a single pair of wire for backhaul.