Havis-Shields c-tcb-30 ユーザーズマニュアル

 

C-TCB-30-INST-9-05  

TOOLS REQUIRED: 
 Ratcheting 

Wrench 

 

Torx Bit Set 

 

Standard Socket Set 

 

 

Standard Wrench Set 
Screwdriver Set 
 

7 

¼-20 x ¾” Hex Head Bolts 

GSM33001 

7 

¼” Flat Washers 

GSM31005 

7  

¼” Lock Washers 

GSM31026 

1 

5/16-18 x 1” Hex Head Bolt 

GSM33012 

2 5/16” 

Flat 

Washers 

GSM31006 

1 

5/16-18 Nylock Nut 

GSM30017 

 

MAIN COMPONENTS: 
QTY DESCRIPTION 

1 

Main Seat Base Plate 

 

 

1 

Pole Support Assembly 

 

 

1 Cross 

Brace 

   

1 Telescoping 

Pole 

   

1.  Remove Passenger Seat: 

•  Remove (2) T-50 torx bolts on passenger seat base. 
•  Disconnect wire plug if vehicle has power seats. 

•  Remove head rest on passenger seat. 

•  Angle seat forward and pull back to remove seat, which is held down in the front by 

(2) hooks on the floor. 

 

•  Position Main Seat Base Plate so that square cutouts are positioned where hooks for 

seat are located.  

•  Replace passenger seat sliding hooks into the floor first. 

•  Replace torx bolts (T-50). 

•  Mount Pole Support Assembly to Main Seat Base Plate using ¼-20 x ¾” Hex Head 

Bolts, Washers and Nuts. 

•  Attach Cross Brace to Pole Support Assembly using Tab on side of pole and  
 

5/16-18 x 1” Hex Head Bolt, Washers and Nuts. 

•  Mount Cross Brace on passenger seat using existing hole.