Garmin g1000 m20m ユーザーズマニュアル
Garmin G1000 Cockpit Reference Guide for the Mooney M20M & M20R
9-1
SECTION 9 – PROCEDURES
SECTION 9: PROCEDURES
9.1 ARRIVALS AND DEPARTURES
Load and Activate a Departure Procedure
1. With the Navigation Map Page displayed, press
the FPL key.
2. Press the LD DP softkey. If a flight plan is active,
the departure airport will be displayed as the
default. A list of available departures is also
displayed.
default. A list of available departures is also
displayed.
3. If no flight plan is active, use the FMS knobs to
enter the identifier of the desired airport. Press
the ENT key.
the ENT key.
4. Turn the large FMS knob to highlight the Depar-
ture field. Turn the small FMS knob to display
a list of available departures.
a list of available departures.
5. Turn either FMS knob to select the desired
departure and press the ENT key.
Figure 9-1 Select Departure
6. A list of runways may be displayed for the
departure. Turn either FMS knob to select the
desired runway and press the
desired runway and press the
ENT key.
7. A list of available transitions is displayed for the
departure. Turn either FMS knob to highlight
the desired transition waypoint and press the
ENT key.
the desired transition waypoint and press the
ENT key.
Figure 9-2 Select Departure Transition
8. With ‘LOAD?’ highlighted, press the ENT key.
The departure will be active when the flight
plan is active.
plan is active.
Load and Activate An Arrival Procedure
1. With the Navigation Map Page displayed, press
the FPL key.
2. Press the LD STAR softkey. If a flight plan is
active, the destination airport will be displayed
as the default. A list of available arrivals is also
displayed.
as the default. A list of available arrivals is also
displayed.
3. If no flight plan is active, use the FMS knobs to
enter the identifier of the desired airport. Press
the ENT key.
the ENT key.
4. Turn the large FMS knob to highlight the Arrival
field. Turn the small FMS knob to display a list
of available arrivals.
of available arrivals.
5. Turn either FMS knob to select the desired
arrival and press the ENT key.
Figure 9-3 Select Arrival