Garmin 190-00556-10 ユーザーズマニュアル

U

NIT

 O

VERVIEW

 > 

V

EHICLE

 I

NSTALLATION

Select a suitable location for installing the unit that allows routing 

of the power cord and does not interfere with vehicle operation. 

. 

If you are NOT using a remote antenna, be certain to select 

a location where the Quest’s flip-up antenna has a relatively 

unobstructed view of the sky. For optimal use, position the 

  NOTE: An optional external remote antenna (Garmin GA 27C) 

may be needed when using the unit in a vehicle with a coated 

windshield or an in-screen heating system.

1.  Align the ball on the end of the suction mount with the 

socket (hole) on the back of the cradle. 

2.  Press firmly to snap the ball into the socket. 

1.  Flip up the antenna. 
2.  Angle the Quest forward as shown above. Fit the bottom of 

the Quest into the cradle.

3.  Tilt the unit back until it snaps into the cradle.

1.  To ensure a tight grip, clean and dry your windshield. 
2.  Pull the lever on the suction cup toward you. Place the 

suction cup on your windshield.

3.  Flip the lever toward the windshield. Rotate the cradle to 

obtain a maximum viewing angle. 

4.  Plug the power cable into an available receptacle.