Garmin 190-00556-10 ユーザーズマニュアル

U

NDERSTANDING

 GPS > 

T

HE

 GPS I

NFORMATION

 P

AGE

As soon as the GPS receiver in your Quest has collected the 

necessary data to calculate a fix, the status bar indicates a position 

fix. The current GPS status and the accuracy of the position fix can 

be found in the satellite status bar located at the top of the page. 

If the Quest cannot establish a position fix after several minutes, 

the Poor Satellite Reception menu appears. The menu might appear 

when you first use your Quest or during normal use if the antenna 

is shaded or if the unit is used indoors.

From the Poor Satellite Reception menu, you can turn off GPS 

when using the unit indoors, update your approximate location, or 

continue to search for the satellites. Updating your approximate 

location ensures that the Quest is searching for the correct satellites 

and is useful if you have traveled over 500 miles with the unit 

turned off. 

1.  Press the 

MENU key, highlight Settings, and press OK. 

2.  Highlight 

GPS Info and press OK to open the GPS 

Information page.

3.  Press 

MENU.

4.  Highlight 

New Location and press OK.

5.  A window appears with two options. Highlight either 

Automatic or Use Map and press OK: 
•  Select 

Automatic to put the unit in AutoLocate mode 

and begin searching the sky for satellites. 

•  Select 

Use Map to select your location on a map page. 

Pan and zoom the map and use the map pointer to find 

your approximate location. Then press 

OK.