Konica Minolta 7216 prev1 ユーザーズマニュアル
5
Copier Control Panel Operations (PC Print Mode)
5-4
7216/7218/7220
Canceling a Print Job
You can cancel a print job from the control panel only when the PC print
mode screen is displayed.
mode screen is displayed.
1
Make sure the copier’s display
shows “*PC PRINT* PRINTING”.
shows “*PC PRINT* PRINTING”.
2
Hold down the [STOP] key for five
seconds, until the “PC JOB
CANCEL?” confirmation message
appears on the display.
seconds, until the “PC JOB
CANCEL?” confirmation message
appears on the display.
3
Press the [YES] key to cancel the
print job or the [NO] key to resume
printing.
print job or the [NO] key to resume
printing.
✎
Note
You can use steps 2 and 3 of the above procedure to cancel a print job
while any of the following errors is indicated on the display: PAPER
EMPTY, INCORRECT PAPER SIZE, NO SUITABLE PAPER, PAPER
SIZE ERROR, LOAD PAPER, PAPER JAM, COVER OPEN, TONER
EMPTY, MEDIA TYPE ERROR.
You can use steps 2 and 3 of the above procedure to cancel a print job
while any of the following errors is indicated on the display: PAPER
EMPTY, INCORRECT PAPER SIZE, NO SUITABLE PAPER, PAPER
SIZE ERROR, LOAD PAPER, PAPER JAM, COVER OPEN, TONER
EMPTY, MEDIA TYPE ERROR.
A print job cannot be canceled while print data is being received by the
copier.
copier.
NO
CLEAR
YES