Hitachi VM-H71A ユーザーズマニュアル

Getting Started 

 

29

CAM. 
2. Press the DATE button and look into the viewfinder. The date and time 
should appear in the lower right with the "1" flashing. 

 

3. Pressing the F.FWD button gives you higher numbers while the REW 
button gives you lower numbers. Select the right month and press STOP 
button. Use the F.FWD, REW and STOP buttons to select the proper day, 
year, hour, minute, and AM or PM. 

 

4. After setting the AM/PM, press the DATE button. The display changes 
and the internal clock starts. 

 

Note: The date/time graphics will be recorded whenever they appear in the 
viewfinder. 

1. Press the DATE button while pressing the STOP button. The flashing 
cursor appears at the month. 
2. Move to where you need to make correction with the STOP button and 
use F.FWD and REW to correct. 
3. Press the DATE button to set the corrected date and time. 

This feature records the date automatically once a day. After you begin 
recording, the date is displayed and recorded automatically for 10 
seconds. The same date is recorded again in the following cases; when 
the cassette is replaced, when "  AUTO" is displayed again after being 
switched to the date display and when the recording is less than 10 
seconds long. 
If the date changes while recording continues over 10 seconds, the date is 
recorded for 10 seconds when recording is restarted after the camcorder 
has been set to the standby once. 
Press the DATE button until "  AUTO" and the date appear at the lower 
right of the viewfinder before you begin to record. The date will be 
recorded whenever it appears in the viewfinder.