Hitachi s18sa ユーザーズマニュアル
English
12
SANDING DISC ASSEMBLY AND DISASSEMBLY
WARNING:
Never attempt to assemble or disassemble the sanding disc while the
disc sander is capable of being turned “ON”.
Be sure power switch is in the “OFF” position and the electrical cord has
been disconnected from the receptacle.
disc sander is capable of being turned “ON”.
Be sure power switch is in the “OFF” position and the electrical cord has
been disconnected from the receptacle.
1. Assembling (Fig. 3)
(1) Turn the disc sander upsidedown so that the
spindle is facing upward.
(2) Attach washer nut, rubber pad and sanding
disc on the spindle, in that order.
(3) While pushing the lock lever with one hand,
lock the spindle by turning the rubber pad
slowly with the other hand.
Tighten the washer nut by using the supplied
wrench.
slowly with the other hand.
Tighten the washer nut by using the supplied
wrench.
CAUTION:
䢇 Tighten the washer nut securely and confirm
that the rubber pad and sanding disc does
not wobble.
not wobble.
䢇 After releasing the lock lever, check to be
sure that it has returned to its normal
position.
position.
2. Disassembling
To remove the sanding disc, follow the
above-mentioned procedure in reverse
order.
above-mentioned procedure in reverse
order.
Fig. 3
Wrench
Spindle
Washer Nut
Rubber Pad
Lock Lever
Tighten
Sanding Disc