Hitachi 13VR10B ユーザーズマニュアル

SEARCH 

 

38

The Time Search function makes it possible to quickly advance the tape to 
your desired position from any position by entering the exact amount of 
playback time of the part you want to skip. 

NOTES: 
• Time Search is set up to 9 hours 50 minutes (9:50) by 10 minutes at a time. 
• This function is not operative in recording mode. 
• Counter Memory function is not operative in this mode. 
• This function is not operative when a cassette tape is not inserted in the 
TV/VCR. 

In the example below: To watch a program after 2 hours, 50 minutes from the 
present position, in either direction. 

1 Select "TIME SEARCH" mode 

 

Press TIME SEARCH button 
OR 
Press MENU button repeatedly to point to "TIME SEARCH". 
Then, press SELECT button. 

2 Enter your desired time 

 

Press CH 

 or 

button repeatedly until your desired time appears. 

(Example: "2:50" for 2 hours 50 minutes) 

3 Begin Time Search 
Press REW or F.FWD button. The tape will move to the specified point. 
The time counts down as the searching progresses.When 0:00 is reached, 
the tape will start playback automatically. 

• While setting: Press MENU button. 
• While the Time Search is in progress: Press STOP/EJECT button on the 
TV/VCR or the remote control. This will delete the selected time. 

This feature provides a method of indexing the starting point. And you can 
easily search the index mark in either fast forward or rewind direction.