Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. ONKYO
  4. BD-SP808
  5. ユーザーズマニュアル

ONKYO BD-SP808 ユーザーズマニュアル

ダウンロード
ページ / 64
52
EN
FUNCTION SETUP
 Network  Connection
Set up the network connection settings in order to use 
BD-Live, DLNA home media server, Netflix / CinemaNow / 
Blockbuster feature or network update function.
 Connection  Test
After you enable a network connection or change the 
network settings, always perform the connection test to 
check if the connection is correctly made.
1
  In stop mode, press [SETUP].
2
 Use [
K / L] to select   , then press 
[ENTER].
3
 Use [
K / L] to select “Others”, then press 
[ENTER].
4
 Use [
K / L] to select “Network 
Connection”, then press [ENTER].
5
 Use [
K / L] to select “Connection Test”, 
then press [ENTER].
Connection test will start automatically and the test 
result will appear right after the connection test finishes.
•  “Testing...” : The test is in progress.
•  “Pass” : Connection test is successfully completed.
•  “Fail” : Connection test failed. Check the connection 
settings.
Press [ENTER] to go to the list of network status 
confirmation screen.
Others
IP 
Address 
 
  xxx.xxx.xxx.xxx
Subnet Mask 
  
xxx.xxx.xxx.xxx
Default Gateway 
  
xxx.xxx.xxx.xxx
Primary DNS 
  
xxx.xxx.xxx.xxx
Secondary DNS 
  
xxx.xxx.xxx.xxx
then press ‘ENTER’.
Connection Test
6
  Press [ENTER] to go back to the previous 
screen, or press [SETUP] to exit.
Note
•  If the connection test passes, you are ready to use 
BD-Live, DLNA home media server, Netflix / 
CinemaNow / Blockbuster feature or network update 
function, using the Internet without making any 
extra settings.
•  If the connection test fails, you may need to change 
the MAC address settings on your router.
•  “Connection Test” is not available when “Disable” is 
selected in “Network Connection”.
Enable(Easy)
Network settings are set to the following settings initially. 
(In most cases, you can connect to the Internet without 
making any changes to the default settings.)
 
- IP Address Setting 
Auto(DHCP)
 
- DNS Setting 
Auto(DHCP)
 
- Proxy Setting 
Do Not Use
 
- Connection Speed 
Auto
 
- BD-Live Setting 
Allow
If you want to set the network settings back to the default 
settings as above (except “BD-Live Setting”), follow the 
procedure below.
1
  Follow steps 1 to 4 in “Connection Test” on 
page 52.
2
 Use [
K / L] to select “Enable(Easy)”, then 
press [ENTER].
•  The unit will start the connection test automatically 
and the test result will appear right after the test 
finishes.
•  After the connection test finishes, press [ENTER] to 
go to network status confirmation screen. 
3
  Press [ENTER] to activate the network 
settings and set the network connection 
automatically. Press [SETUP] to exit.
Note
•  The setting of “BD-Live Setting” will not be set back to 
the default, even if you follow the procedure.
Enable(Custom)
In following cases, select “Enable(Custom)” to set each 
setting as necessary.
 
-  When connection test failed with the setting of 
“Enable(Easy)”.
 
-  When instructed by your Internet service provider to make 
specific settings in accordance with your network 
environment.
• IP Address Setting / DNS Setting
1
  Follow steps 1 to 4 in “Connection Test” 
on page 52.
2
  
Use [
K / L] to select “Enable(Custom)”, 
then press [ENTER].
3
    Use  [
K / L] to select “IP Address Setting”, 
then press [ENTER] repeatedly to select 
the desired setting.
“Auto(DHCP)” : 
 If your router has DHCP server 
function, select “Auto(DHCP)”.
“Manual” : 
 If your router does not have DHCP 
server function, select “Manual”.