ICOM ic-t2h ユーザーズマニュアル
13
4
BASIC OPERATION
✔ Convenient
Monitor function: Push and hold [
] to listen to weak sig-
nals that do not open the squelch; or push [
] twice to mon-
itor a signal without having to continuously hold [
].
Squelch control: The transceiver employs a noise pulse
count system and therefore, squelch is adjusted automatically
when “AUto” is selected for the squelch level:
count system and therefore, squelch is adjusted automatically
when “AUto” is selected for the squelch level:
Push [SQL], then push [Y]/[Z] one or more times until “AUto”
appears. Manual levels from “Sql 1” to “Sql 8” are also avail-
able to suit personal preferences and operating conditions.
appears. Manual levels from “Sql 1” to “Sql 8” are also avail-
able to suit personal preferences and operating conditions.
■ Selecting a memory channel
➀
Push [
A
V] to select memory chan-
nel mode, if necessary.
• “X” appears.
➁
Push 2 digit keys to select the de-
sired memory channel (or push the
[Y]/[Z] keys).
sired memory channel (or push the
[Y]/[Z] keys).
• The first nine memory channels are
preceded by a “0.”
• When you want to select scan edge
channels PA or Pb, push [4], [1] or [4],
[2], respectively.
■ Lock function
The lock function prevents accidental frequency changes and
accidental function activation. By default, [
accidental function activation. By default, [
D
L] toggles this
function on and off.
Push [
D
L] for 1 sec. to toggle the function on and off.
• “é” appears while the lock func-
tion is activated.
• [PTT], [PWR/VOL] and [
]can be
used regardless of this setting.
MR
MR
P
0
0
4
IC-T2H_RTTE.qxd 03.6.20 18:57 Page 13 (1,1)