ICOM ic-t2h ユーザーズマニュアル

4

2

PANEL DESCRIPTION

!0 SQUELCH KEY [SQL]*

➥ Push [SQL], then push [Y]/[Z] one or more

times to select squelch level. “AUto”, “Sql 1” to
“Sql 8” are available to suit personal preferences
and operating conditions. (p. 13)

!1 SCAN START/STOP KEY [SC]*

➥ Push [SC] to start the scan. (p. 25)

• To change the scan direction, push [Y] or [Z].

➥ Push [SC] again to stop the scan. (p. 25)

!2 DUPLEX KEY [DUP]*

➥ Push once to select – DUP or twice to select

DUP mode. (p. 15) 

!3 POWER SELECT KEY [H/L]*

➥ Push to toggle high and low power output. (p.

12)

• “LOW” appears when low power is selected.

!4 VFO/MEMORY KEY [

➥ Push to toggle VFO mode and memory mode.

(p. 11)

• “X” appears when memory mode is selected.

➥ Push for 1 sec. to enter “Set mode”. (p. 14)
➥ Transmits an “A” for DTMF operation while

pushing [PTT].

!5 MEMORY WRITE KEY [

➥ Push [

M], then select a memory channel num-

ber with [Y]/[Z].

➥ Push [

M] for 1 sec. to program the information

into the memory channel. (p. 19)

➥ Transmits a “B” for DTMF operation while push-

ing [PTT].

!6 TONE SETTING KEY [

➥ Toggles tone squelch operation ON/OFF.

• “T”, “TSQL” or “TSQL” appears on the display.

➥ Transmits a “C” for DTMF operation while push-

ing [PTT].

!7 LOCK KEY [

➥ Toggles the lock function ON/OFF. (p 13)
➥ Transmits a “D” for DTMF operation while push-

ing [PTT].

!8 GUIDE KEY [#] (p. 31)

➥ Activates the guide function.
➥ Transmits an “F” for DTMF operation while

pushing [PTT].

!9 DIGIT KEYS

➥ Input the specified digit during frequency input,

memory channel selection, etc.

➥ Transmit the DTMF code of the specified digit

while pushing [PTT].

@0 MHz KEY [M] (p. 12)

➥ Used as a short cut for inputting frequencies.
➥ Transmits an “E” for DTMF operation while

pushing [PTT].

to

IC-T2H_RTTE.qxd  03.6.20 18:57  Page 4 (1,1)