Oricom bb100 ユーザーズマニュアル

 
 

 

 

- 8 -

 

 

Standby mode 
When the handset is not in use is in the standby mode. The LCD will display: 
 
 
Where: 
1: 

 

Handset assigned number 

BB100:  

Handset name 

10:37:  Time of the day ( 10 AM, 37 minutes)   (ex : 23:37 : 11 PM, 37 minutes) 
 
Note: If power is disconnected from your phone, the clock will be inaccurate.    When the power is 
restored, it will be automatically reset the time to 12:00 and the date to 01/01. You need to set the correct time 
and date when the power is turned on. 
 
If you subscribe to your network operators Caller ID services, your phone clock will automatically set the time 
and date when you receive CID from the network.   
 
USING YOUR PHONE 

1) 

Press “Talk” button and wait for dial tone.  The In Use indicator   
and 

 icon will appear in the display. 

2) 

Dial your desired number on handset. 

3)                       Speak into the microphone when the party answers. 

4) 

To end the call, either press ‘Talk” or place the handset back on  
the base.  The In Use indicator    and 

 icon will disappear. 

 
 

                              Pre-dialling allows you to enter and modify a number before dialling. 
1)                  

In standby mode (i.e. when the phone is not in use), enter the  
telephone number from the numeric keypad. (up to 25 digits  
allowed.  If the number exceeds 12 digits, the last 12 digits are  
displayed) you wish to dial; it will appear in the display. 

2)     

                           If you have entered a digit incorrectly, you can delete it by pressing  

the CANCEL button. 

3)   

                           If you wish to delete the whole telephone number, press and hold  

the CANCEL button for 3 seconds.   The handset will return to  
standby mode. 

4) 

Press TALK button.   The displayed number will be dialled. 

5) 

To end the call, either press the TALK button or place the handset  
back on the base. 

 

•  When you receive an incoming call both your handset and base will ring, provided that the ringers are 

set to on.  The  

 icon will flash in the handset display and the In Use LED on the base will flash as 

well.   

•  If you have subscribed to caller ID service, the New CID symbol (see LCD layout) blinks in the display.   

The caller’s number (if available) is also displayed.  The date and time of the call is displayed when OK 
is pressed. 

1 BB100 10.37