OKI office 87 ユーザーズマニュアル
Basic Operations
43
Stopping a Transmission
To stop a transmission while it is in progress, follow the instructions
below.
below.
1
Press the STOP key twice. The display shows STOPPED.
2
If documents are stuck partway through the document feeder, you
may see a RELOAD DOCUMENT message on the display. Press
the STOP key again. Your MFP machine feeds the document the
rest of the way through the document feeder.
may see a RELOAD DOCUMENT message on the display. Press
the STOP key again. Your MFP machine feeds the document the
rest of the way through the document feeder.
Sending a Fax to Multiple Locations (Broadcasting)
Your MFP machine’s broadcasting feature allows you to send a document
to many different locations at the same time. For each broadcast opera-
tion, you can select as many One Touch keys, groups, and Auto Dial
Codes as you like. You can also manually enter up to ten telephone
numbers on the numeric keypad.
to many different locations at the same time. For each broadcast opera-
tion, you can select as many One Touch keys, groups, and Auto Dial
Codes as you like. You can also manually enter up to ten telephone
numbers on the numeric keypad.
Performing a Broadcast Operation
1 Load your documents.
2 Select a location. Refer to the instructions below.
To Select Using
Do This
A One Touch key
Press the One Touch key.
An Auto Dial number
Press the AUTO DIAL key, then enter the two digit
Auto Dial number on the numeric keypad.
Auto Dial number on the numeric keypad.
A group
Using the numeric keypad, press the # key, then enter
the number of the group.
the number of the group.
A number dialed on the
Dial the number as you would on a
numeric keypad
normal telephone, then press START.
3 Select another location within 3 seconds after step 2.
4 Repeat steps 2 and 3 as often as necessary to continue selecting
locations.
5 When you are finished selecting locations, press START. ENTRY IS
OK? displays.
6 Press START. Your MFP begins scanning the document and dialing
the numbers.