Q-Logic 8200 ユーザーズマニュアル

ページ / 130
2–Configuring NIC
Windows Property Pages
SN0054671-00  A
2-11
Large Send Offload V1 IP4 
Enables and disables TCP large send offload. Allows 
host TCP stack to give bigger than maximum seg-
ment size (MSS) packets to the driver, and then with 
the help of hardware, splits the larger segments into 
MTU size packets before sending on wire. 
Registry Key: *LsoV1IPv4 
Default: Enabled. 
Values: Enabled, Disabled 
Size of LSO v1: 64K 
Large Send Offload V2 IP4 
Enables and disables TCP large send offload. Allows 
host TCP stack to give bigger than MSS packets to 
the driver, and then with the help of hardware, splits 
the larger segments into MTU size packets before 
sending on wire. 
Registry Key: *LsoV2IPv4 
Default: Enabled. 
Values: Enabled, Disabled 
Size of LSO v2: 128K 
Large Send Offload V2 IP6 
Enables and disables TCP large send offload. Allows 
host TCP stack to give bigger than MSS packets to 
the driver, and then with the help of hardware, splits 
the larger segments into MTU size packets before 
sending on wire. 
Registry Key: *LsoV2IPv6 
Default: Enabled. 
Values: Enabled, Disabled 
Size of LSO v2: 128K 
Locally Administered Address 
Defines the locally administered address (LAA) that 
users and administrators can set on this interface. 
This address overrides the permanent address of the 
adapter (that may have been Flashed into the hard-
ware). 
Registry Key: NetworkAddress 
Format: Hexadecimal 
Options: Value (a value is required, enter the 12 hex 
bytes of the MAC address to be used), or not present. 
Table 2-1. Windows Driver Configurable Parameters  (Continued)
Property
Description