GE dect 28166 ユーザーズマニュアル
9
Handset - Setting Local Area Codes
You can progrom the way the Caller ID records are displayed, for up to five different codes
for your area. For example; if 7 digits is selected, the number will be displayed as xxx-xxxx,
and etc.
1. Make sure your phone is
1. Make sure your phone is
OFF (not in TALK mode).
. Press the
MENU (SKR) to go to the main menu.
3. Use the 5 or 6 buttons to scroll to
SET AREA CODE.
4. Press the
SELECT (SKL) to confirm.
5. Use the touch-tone pad to enter your 3-digit area code.
6. Press the
6. Press the
DONE (SKL) to confirm the selection.
Basic Operation
Charge/In Use Indicator
The phone is
ON when the LED indicator on the handset and the charge/in use indicator on the
base is lit. The handset and base indicators flash when you receive a call.
Answering a Call
1. To answer a call, press
LINE 1, LINE 2, or the handsfree button before you begin
speaking.
. To hang up, press the
END/CANCEL button on base or handset, or place the handset
in the base cradle.
Making a Call
1. Press
LINE 1, LINE 2, or the handsfree button and dial the desired number.
-OR-
Enter the number first, then press
LINE 1, LINE 2, or the handsfree button and the
number automatically dials.
NOTE: Press the handsfree button on the handset during conversation
to switch between handset speakerphone and handset earpiece.
. To hang up, press the
END/CANCEL button on base or handset, or place the handset
in the base cradle.
NOTE: If you want to hang up during handset handsfree mode, you
need to hang up by pressing the END/CANCEL button on the handset.
NOTE: You may enter up to 32 pre-dial digits.
NOTE: If you want to delete the pre-dial number you entered, press the
NOTE: You may enter up to 32 pre-dial digits.
NOTE: If you want to delete the pre-dial number you entered, press the
DELETE (SKR) to erase the digit(s).