GE dect 28166 ユーザーズマニュアル

40

1.  Make sure the phone is 

OFF (not in TALK mode).

.  Press the 

redial button, then use the 

5

 or 6

 buttons to select the desired number.

3.  Press the 

STORE (SKL) to store the number.

NOTE: If using handset; HANDSET BASE shows in the display. Use the 

5

 6

 button to select HANDSET or BASE, and press the SELECT (SKL) to 

4.  Use the touch-tone to enter the name (up to 11 characters).
5.  Press the 

DONE (SKL) to scroll to ENTER NUMBER.

6.   Repeat Steps 9 through 11 in Storing CID Records in Internal Memory.

Press the 

#PAUSE button on the touch-tone pad twice to insert a delay in the dialing 

sequence of a stored telephone number when a pause is needed to wait for a dial tone (for 

example, after you dial 9 for an outside line, or wait for a computer access tone.) A pause 

shows on the display as a 

P. Each pause counts as 1 digit in the dialing sequence. If you need 

a longer pause, press the 

#PAUSE button twice again.

1.  Make sure the phone is 

OFF (not in TALK mode).

.  Press the 

MEMORY (SKL) to enter the main menu.

3.  Use the 

5

 or 

6

 button to scroll to desired record.

 

 

-OR-

 

Press the -9 key to search for the desired record alphabetically. For example, if the 

record names starts with the letter "N", pressing the 6 key will automatically skip to the 

records starting with the letter "M". The 6 button can then be pressed multiple times 

until the records starting with the letter "N" are displayed. You can then use the  

5

 or 

6

 button to scroll to desired record.

4.  Press the 

VIEW (SKR) to review the detail information of the record.