Zenith h20h52dt ユーザーズマニュアル
79-I. UPN MSB-1
User programmable number, most significant byte-
1 readable by M.P.I. command.
User programmable number, most significant byte-
1 readable by M.P.I. command.
80-I. UPN MSB-2
User programmable number, most significant byte-
2 readable by M.P.I. command.
User programmable number, most significant byte-
2 readable by M.P.I. command.
81-I. UPN LSB
User programmable number, least significant byte
readable by M.P.I. command.
User programmable number, least significant byte
readable by M.P.I. command.
82-I. CHKSM ERROR
Enforces rigid M.P.I checksum validation.
Set to 1 for validation. Set to 0 to turn off.
Enforces rigid M.P.I checksum validation.
Set to 1 for validation. Set to 0 to turn off.
83-I. HANDSHK TIME
Adds an additional delay to the handshake time
which is 64 msec, thus relaxing M.P.I. timing
requirements to be compatible with PC based
Windows controlled systems, range is 0 - 5.
Set to 0 to retain standard 64 msec delay.
Set to 1 - 5 to increase @ 16 msec additional, the
delay up to 144 msec.
Adds an additional delay to the handshake time
which is 64 msec, thus relaxing M.P.I. timing
requirements to be compatible with PC based
Windows controlled systems, range is 0 - 5.
Set to 0 to retain standard 64 msec delay.
Set to 1 - 5 to increase @ 16 msec additional, the
delay up to 144 msec.
84-I. PERMANENT BLK
Allows Parental Control blocking schemes to be
permanent by removing the blocking hours
function.
Set to 1 to install Parental Control blocking
restrictions permanently.
Set to 0 for user-specified hours control of
blocking schemes.
Allows Parental Control blocking schemes to be
permanent by removing the blocking hours
function.
Set to 1 to install Parental Control blocking
restrictions permanently.
Set to 0 for user-specified hours control of
blocking schemes.
85-I. NOT USED
86-I. NOT USED
87-I. NOT USED
88-I. EN NOISE MUTE (Enable Noise Mute)
Enables soft mute when a signal is not present.
Enables soft mute when a signal is not present.
89-I POKE ENABLE
Enables poke function through M.P.I. commands
Enables poke function through M.P.I. commands
90-I KEY LOCK
Disables front panel keys. Set to 1 for disable. Set
to 0 for enable.
Disables front panel keys. Set to 1 for disable. Set
to 0 for enable.
Page 38
Installer Menu Item 79-I through 90-I: Detailed Descriptions.
Installer Menus