Hitachi c14d24 ユーザーズマニュアル

ページ / 53
GB    - 7 -
Before Switching on your TV
Power connection
IMPORTANT: The TV set is designed to op-
erate on 230-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the
ambient room temperature before you con-
nect the set to the mains.
Connections to the Aerial socket
V H F /U H F
:
795($53$1(/
&$%/(79
• Connect the aerial or cable TV plug to the
Aerial socket located at the back of the TV. 
If
you are also connecting a VCR, plug the
aerial cable into the aerial input socket on
the VCR and then connect the  RF output
cable from the RF out socket on the VCR to
the TV aerial socket. See Page 20 for further
details.
How to connect other devices
IMPORTANT: Switch off the TV before con-
necting any external device.
Sockets  for  external  connections  are  at  the
back and front of the TV. For connection of
other devices via Euroconnector refer to the
manuals of the related devices.
Inserting batteries in the remote
control handset
• Place the batteries in the right directions as
seen below.
• Remove the battery cover located on the
back of the handset by gently pulling up-
wards from the indicated part.
• Insert two AAA (R03) or equivalent type bat-
teries inside.
• Replace the battery cover.
NOTE: Remove  batteries  from  remote  con-
trol handset when it is not to be used for a
long  period.Otherwise  it  can  be  damaged
due to any leakage of batteries.
Switching the TV ON/OFF
To switch the TV on
Your TV will switch on in two steps:
1- Press the power button located on the front
of the TV. 
The 
TV switches itself to standby
mode and the RED LED located below the
TV 
illuminates
.
2- To switch on the TV from stand-by mode
either:
Press a digit button on the remote control so
that a programme number is selected,
or,
Press  Programme  Up  or  Down  buttons  on
the front of the TV or on the remote control,
so  that  last  switched  off  programme  is  se-
lected.
By either 
method 
the  TV  will  switch  on  and
the RED LED will turn GREEN.
To switch the TV off
• Press the stand-by button on the remote
control, so the TV will switch to stand-by
mode and the GREEN LED will become
RED,
or,
Press the power button located on the front
of the TV, so the TV will switch off and the
GREEN LED will turn off.
N.B.  Ensure  that  the  DVD  tray  is  closed
before you turn the TV off or the tray will
stay out.