Hanna Instruments hi 9815 ユーザーズマニュアル
4
The Hanna pH Turtle consists of a
pH transmitter equipped with an
RS 232 connector and cable as
well as a BNC input for the pH
electrode and the electrode itself.
Any communication with the meter
is performed through the PC.
Before operating the meter,
pH transmitter equipped with an
RS 232 connector and cable as
well as a BNC input for the pH
electrode and the electrode itself.
Any communication with the meter
is performed through the PC.
Before operating the meter,
HI 981500 pH Turtle software must
be installed (refer to the software on-line help).
Connect the pH Turtle’s RS 232 cable to a free serial port of
your PC. Connect the BNC electrode to the connector and dip it
in your sample. Then run the pH Turtle software on your
computer. Refer to the software on-line help for measurement.
The pH Turtle software allows you to log the measurements,
visualize real-time graphs, compensate for the temperature vari-
ance right from the keyboard and to set the alarm limits as well
as an exhaustive on-line help. It is also available in several
languages. Data can be saved and further elaborated with com-
mon spread sheet programs (e.g. Excel
Connect the pH Turtle’s RS 232 cable to a free serial port of
your PC. Connect the BNC electrode to the connector and dip it
in your sample. Then run the pH Turtle software on your
computer. Refer to the software on-line help for measurement.
The pH Turtle software allows you to log the measurements,
visualize real-time graphs, compensate for the temperature vari-
ance right from the keyboard and to set the alarm limits as well
as an exhaustive on-line help. It is also available in several
languages. Data can be saved and further elaborated with com-
mon spread sheet programs (e.g. Excel
®
, Lotus 1-2-3
®
, etc.).
DESCRIPTION & START UP
DESCRIPTION & START UP
DESCRIPTION & START UP
DESCRIPTION & START UP
DESCRIPTION & START UP
istrphtuR1.p65
5
WARRANTY
WARRANTY
WARRANTY
WARRANTY
WARRANTY
HI 9815 pH transmitter is guaranteed for 2 years against
defects in workmanship and materials when used for their intended
purpose and maintained according to instructions.
defects in workmanship and materials when used for their intended
purpose and maintained according to instructions.
HI 1333B pH
electrode is guaranteed for 6 months. This warranty is limited to
repair or replacement free of charge. Damages due to accident,
misuse, tampering or lack of prescribed maintenance are not cov-
ered. If service is required, contact the dealer from whom you had
purchased the instrument. If under warranty, report the model
number, date of purchase, serial number and the nature of the
failure. If the repair is not covered by the warranty, you will be
notified of the charges incurred. If the instrument is to be returned
to Hanna Instruments, first obtain a Returned Goods Authorization
Number from the Customer Service department and then send it
with shipment costs prepaid. When shipping any instrument, make
sure it is properly packaged for complete protection. To validate
your warranty, fill out and return the enclosed warranty card within
14 days from the date of purchase.
repair or replacement free of charge. Damages due to accident,
misuse, tampering or lack of prescribed maintenance are not cov-
ered. If service is required, contact the dealer from whom you had
purchased the instrument. If under warranty, report the model
number, date of purchase, serial number and the nature of the
failure. If the repair is not covered by the warranty, you will be
notified of the charges incurred. If the instrument is to be returned
to Hanna Instruments, first obtain a Returned Goods Authorization
Number from the Customer Service department and then send it
with shipment costs prepaid. When shipping any instrument, make
sure it is properly packaged for complete protection. To validate
your warranty, fill out and return the enclosed warranty card within
14 days from the date of purchase.
All rights are reserved. Reproduction in whole or in part is prohib-
ited without the written consent of the copyright owner, Hanna
Instruments Inc., Woonsocket, Rhode Island, 02895 , USA.
ited without the written consent of the copyright owner, Hanna
Instruments Inc., Woonsocket, Rhode Island, 02895 , USA.
Hanna Instruments reserves the right to modify the design, con-
struction and appearance of its products without advance notice.
struction and appearance of its products without advance notice.
6
Recommendations for users
Before using this product, make sure that it is entirely suitable for the environment in which it is used.
Operation of this instrument in residential areas could cause unacceptable interferences to radio and TV
equipments. The glass bulb at the end of the electrode is sensitive to electrostatic discharges. Avoid
touching this bulb at all times. During operation, ESD wrist straps should be worn to avoid possible
damage to the electrode by electrostatic discharges. Any variation introduced by the user to the supplied
equipment may degrade the instruments’ EMC performance. To avoid electrical shock, do not use this
instrument when voltages at the measurement surface exceed 24 VAC or 60 VDC. To avoid damages or
burns, do not perform any measurement in microwave ovens.
Before using this product, make sure that it is entirely suitable for the environment in which it is used.
Operation of this instrument in residential areas could cause unacceptable interferences to radio and TV
equipments. The glass bulb at the end of the electrode is sensitive to electrostatic discharges. Avoid
touching this bulb at all times. During operation, ESD wrist straps should be worn to avoid possible
damage to the electrode by electrostatic discharges. Any variation introduced by the user to the supplied
equipment may degrade the instruments’ EMC performance. To avoid electrical shock, do not use this
instrument when voltages at the measurement surface exceed 24 VAC or 60 VDC. To avoid damages or
burns, do not perform any measurement in microwave ovens.
CE DECLARATION OF CONFORMITY
CE DECLARATION OF CONFORMITY
CE DECLARATION OF CONFORMITY
CE DECLARATION OF CONFORMITY
CE DECLARATION OF CONFORMITY
ISTRPHTUR1 07/01