HP 518873-B21 ユーザーズマニュアル

ページ / 43
NOTE:
NOTE:
NOTE:
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use
of an HP approved configurator. Contact your local sales representative for additional information.
Ethernet Mezzanine
Ethernet Mezzanine
Ethernet Mezzanine
Ethernet Mezzanine
Options
Options
Options
Options
Gigabit Ethernet Mezzanines
Gigabit Ethernet Mezzanines
Gigabit Ethernet Mezzanines
Gigabit Ethernet Mezzanines
 
HP NC325m PCI Express Quad Port Gigabit Server Adapter
416585-B21
HP NC360m Dual Port 1GbE BL-c Adapter
445978-B21
HP NC364m Quad Port 1GbE BL-c Adapter
447883-B21
HP NC382m PCI Express Dual Port Multifunction Gigabit Server Adapter
453246-B21
10 Gigabit Ethernet Mezzanines
10 Gigabit Ethernet Mezzanines
10 Gigabit Ethernet Mezzanines
10 Gigabit Ethernet Mezzanines
 
NOTE:
NOTE:
NOTE:
NOTE: A 10 Gigabit Ethernet adapter is required for each server blade connecting to
a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 2-4 (HP
BladeSystem c3000 Enclosure).
NOTE:
NOTE:
NOTE:
NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of server
memory.
NOTE:
NOTE:
NOTE:
NOTE: Only (2) 10 Gigabit Ethernet mezzanine cards can be installed in the BL685c
G7 at the same time.
NOTE:
NOTE:
NOTE:
NOTE: Each 10 Gigabit Either adapter supports linking at 1000Mbps or 10000Mbps
when not connected to a Flex-10 enabled module and will link with all current 1Gb
switches at 1Gb.
NOTE:
NOTE:
NOTE:
NOTE: The ROM Based Setup Utility (RBSU) feature allows for the configuring of a
FlexFabric Adapter to any of the supported protocols. For example iSCSI to FCoE
(Fibre Channel over Ethernet). Note that a HP Virtual Connect profile takes
precedence over the setting in this menu. Also, some FlexFabric Adapters may require
that network boot be enabled in order to configure the protocol. If the protocol is
configured without enabling network boot with certain FlexFabric Adapters, the
protocol may not take effect. Once the protocol has taken effect on the first boot after
configuring this option, network boot may be disabled if desired.
 
HP NC532m Dual Port 10GbE Multifunction BL-c Adapter
467799-B21
HP NC542m Dual Port Flex-10 10GbE BL-c Adapter
539857-B21
HP NC550m 10Gb 2-port PCIe x8 Flex-10 Ethernet Adapter
581204-B21
HP BLc NC551m Dual Port FlexFabric 10Gb Converged Network Adapter
NOTE:
NOTE:
NOTE:
NOTE: Only (2) NC551m (PN 580151-B21) or NC553m (PN613431-B21)
mezzanine cards can be installed in the BL685c G7 at the same time.
580151-B21
HP NC552m 10Gb 2-port Flex-10 Ethernet Adapter
610609-B21
HP NC553m 10Gb 2-port FlexFabric Adapter
NOTE:
NOTE:
NOTE:
NOTE: Only (2) NC551m (PN 580151-B21) or NC553m (PN613431-B21)
mezzanine cards can be installed in the BL685c G7 at the same time.
613431-B21
QuickSpecs
HP ProLiant BL685c Generation 7 (G7) Server Blade
HP ProLiant BL685c Generation 7 (G7) Server Blade
HP ProLiant BL685c Generation 7 (G7) Server Blade
HP ProLiant BL685c Generation 7 (G7) Server Blade
Core Options
DA - 13655   North America — Version 20 — November 14, 2011
Page 21