Ruby Tech GS-1108C ユーザーズマニュアル

Noise  free  fanless  design  for  home  and  SOHO  users

    Home and SOHO users are always working in a small and limited space,
    therefore, noise free fanless switch becomes necessary and important.

lso 

The switch supports not only Layer 2 802.1p Priority Queue control, but a

    supports programmable higher layer classification and prioritization to enable
    enhanced Quality of Service (QoS) support for real time applications base on
    information taken from Layer 2 to Layer 4, such as VoIP.

Port mirroring copies traffic from a specific port to a target port. This 

    mechanism helps track network errors or abnormal packet transmission 
    without interrupting the flow of data.

The VLAN feature in the switch offers the benefits of both security and 

   performance. VLAN is used to isolate traffic between different users and thus
   provides better security. Limiting the broadcast traffic to within the same VLAN
   broadcast domain also enhances performance.

 

The Gigabit ports can be combined together to create a multi-link load-sharing

    trunk. Up to 4 Gigabit ports can be set up per trunk. The switch supports up to
    4 trunking groups. Port trunks are useful for switch-to-switch cascading,
    providing very high full-duplex speeds. 

    We use SNMP Trap mechanism to inform supervisor to know the instant 
    abnormal status of the switch.

    Port 

7, 8 dual media ports are provided for flexible fiber connection. You can 

    select to install optional transceiver modules in these slots for short, medium 
    or long distance fiber backbone attachment. Use of the SFP will disable their 
    corresponding built-in 10/100/1000Base-T connections.

    Instead of using CLI interface, we provide a more convenient GUI for user.
    We just need to configure switch via Web Browser. It is more quickly for user
    to familiar the method to control switch on the basis of this design.

G
i

g

a

b

i

t

 S

w
i

t

c

h

Gigabit Switch

Web Smart Switch 

8-Port Web-Smart Gigabit Ethernet Switch with 2 SFP Dual Media

    ---IEEE 802.3 10Base-T Ethernet
        (twisted-pair copper)
    ---IEEE 802.3u 100Base-T Ethernet
        (twisted-pair copper)
    ---IEEE 802.3ab 1000Base-T Ethernet
        (twisted-pair copper)
    ---IEEE 802.3z 1000Base-X Ethernet
    ---IEEE 802.3x Flow Control capability
    ---ANSI/IEEE 802.3 Auto-negotiation
    ---IEEE 802.1q VLAN

    ---8 Gigabit Ethernet ports
    ---Auto-negotiation
    ---Auto-MDIX
    ---Back pressure flow control for half 
        duplex
    ---Flow control for full duplex.
    ---Port 7,8 are TP/SFP Fiber auto sense
    ---Connector: 8 RJ-45 and 2 SFP 
        module

   Switching capacity:
    ---16 Gbps forwarding bandwidth for 
        switch, non-blocking switch fabric
    ---Wire speed performance
    ---8 K MAC addresses 
    ---144KB on-chip frame buffer.
    ---Jumbo frame support.
    VLAN
    ---Port-base VLAN
    ---IEEE802.1q tag-base VLAN, 4094
        Max
    QoS
    ---Supports Layer 4 TCP/UDP Port and 
        ToS Classification
    ---Supports 802.1p QoS with two level 
        priority queue
    Bandwidth Control
    ---Supports bandwidth rating per port 
       ingress and egress rate limit 1000
       Mbps with 1Mbps increment
    Port Trunk
    ---Port trunking with 4 trunking groups
    ---Up to 8 ports for each group
    Broadcast Storm
    ---Broadcast Storm suppression
    Port Mirroring
    ---All port support port mirroring

RUB

TECH

R