Hitachi VM-H81A ユーザーズマニュアル

Basic Techniques 

 

36

Note: Press the projection on the Start/Stop button to engage the button. 
Note: TAPE flashes in the viewfinder when the tab on the side of the cassette 
is completely visible. 

 

9. To stop recording press the Start/Stop button and REC disappears from 
the viewfinder replaced by    (

). This places the camcorder in standby. 

Note: TAPE END flashes in the viewfinder when about 3 minutes or less 
remain of the tape cassette. 
Note: If the camcorder is left in record/pause mode for more than 5 minutes, 
the camcorder turns off automatically. To restart it press the Start/Stop button 
on the camcorder and the camera returns to record/pause mode. 

1. Set the record mode select switch to "HOLD TO REC" before starting 
recording. 
2. Press the Start/Stop button and hold it. The camcorder records while 
the Start/Stop button is held depressed and enters the record pause mode 
when the button is released. 

Note: Switch the record mode in modes other than recording. 

Playback of your video tapes is free of connection problems with AV 
optical link system. The system converts picture and sound from the tape 
into infrared signals and transmits them to the optical receiver. The 
receiver is installed to your TV or VCR. 

Note: This system cannot be used when the camcorder is in the camera  
mode. 
Note: This system cannot be used with a television that does not have 
audio/video input jacks.