Olympus dp12 ユーザーズマニュアル

32

Fig. 22

Fig. 23

}The recorded pictures can be displayed on a video monitor by using the provided video cable.

This makes it possible to view the pictures on a large screen even when a PC is not available.
Before connecting the cable, be sure to set the main switch of the control box to “    ” (OFF) and also turn off the
video monitor.

1. Connect the video cable 1 to the video output connector 2 on the

control box.

2. Connect the other end 3 of the video cable to the video input connector

of the monitor.

1

    Monitor Observation in Record Modes

(Fig. 23)

1. Turn on the video monitor.
2. Set the main switch of the control box to “ I ” (ON), then press the MODE

button 1 to select REC MANU or REC AUTO.

3. The video monitor shows the live image.
}Even if “Up/down inverted display" is set at “Setting the Picture Display

Orientation" (page 25), the image displayed is an erect image. Then
characters in the scale displayed are inverted (Up/down inverted) im-
ages.

2

    Monitor Observation in Play Mode

1. Turn on the video monitor.
2. Set the main switch of the control box to “ I ” (ON), then press the MODE

button 1 to select PLAY.

3. The video monitor shows a playback picture.
4. Press either MOVE button      or      2 to select the picture to be displayed.

Use either MOVE button     or     3 to select the magnification (1/16X to
4X).

 · The picture may not be displayed on the center of the screen

depending on the adjustment of the monitor. This is not a mal-
function.

 · The displayed picture may be enclosed in a black frame de-

pending on the video monitor in use. If the picture is output from
the video monitor to a video printer, the black frame may be
noticeable in the printout.

²

³

@

²

³

@