honda-power-equipment hht31s ユーザーズマニュアル

The Honda HHT25S and HHT31S trimmer/brush 
cutters are supplied with a shoulder harness and 
safety glasses. Refer to page 14 for a description 
of other equipment and protective clothing you 
will need.

Shoulder Harness
A full shoulder harness must be worn by the 
operator of these Honda trimmers/brush cutters 
when equipped with a blade and debris shield. If 
the trimmer is equipped with a cutting-line head 
and shield with cutoff knife, the operator may 
wear a single-strap harness

A suitable shoulder harness is supplied with each 
new Honda HHT25S and HHT31S trimmer/brush 
cutter. Replacement shoulder harnesses may be 
purchased through any authorized Honda 
trimmer/brush cutter servicing dealer.

Before operation, adjust your shoulder harness 
as described on page 16.

Quick-Release Latch
The shoulder harnesses supplied with these 
trimmers are equipped with a quick-release latch.

Pull the latch tab upward to detach the trimmer 
from the harness.

Insert the latch tongue in the slot of the quick-
release latch to reattach the trimmer to the 
harness.

Safety Glasses
Safety glasses or goggles that comply with ANSI 
(American National Standards Institute) standard 
Z87.1 must be worn by the operator of any 
Honda trimmer/brush cutter. The safety glasses 
supplied with each new Honda HHT25S and 
HHT31S trimmer/brush cutter complies with this 
ANSI standard.