honda-power-equipment hht31s ユーザーズマニュアル

U-Shaped Handlebar Installation
1. Remove the four 5 x 28 mm bolt/washers and 

handlebar holder A.

2. Set the U-shaped handle into handlebar 

holder B with the throttle trigger facing to the 
right.

3. Adjust the handlebar position as shown.

4. Tighten the four 5 x 28 mm bolt/washers.

TORQUE: 3.6 ft lb (5 N·m, 0.5 kg-m)

5. Make sure the tie straps are positioned as 

shown.

6. Operate the throttle trigger and make sure the 

throttle operates smoothly.