honda-power-equipment hht31s ユーザーズマニュアル

1. Turn the blade cover slowly until the 

cover latch is clear of the debris shield.
Unfasten the latch by lifting the tab off 
the post.

2. Pull the post end away from the blade 

and set it on top of the blade as shown.

3. Turn the blade cover slowly until the post 

end is clear of the debris shield, then 
remove the blade cover from the blade.

1. Install the blade cover over the blade so 

half of the blade is covered.
To prevent the post end from interfering 
with the debris shield, pull the post end 
away from the blade and set it on top of 
the blade as shown.
Turn the blade cover slowly until the post 
end clears the debris shield.

2. Reposition the post end over the blade.

3. With the blade cover fully seated on the 

blade, latch the tab over the post.

1

3

2

3

1

2