honda-power-equipment hht31s ユーザーズマニュアル
51
TRANSPORTING
BEFORE LOADING
If the engine has been running, allow it to cool for
at least 15 minutes before loading the trimmer on
the transport vehicle. A hot engine and exhaust
system can burn you and can ignite some
materials.
If the engine has been running, allow it to cool for
at least 15 minutes before loading the trimmer on
the transport vehicle. A hot engine and exhaust
system can burn you and can ignite some
materials.
Always turn the ignition switch to the STOP (O)
position. Make sure the fuel cap is securely
tightened.
position. Make sure the fuel cap is securely
tightened.
LOADING
The trimmer may be secured by suitable clamps,
hangers or straps. Secure the trimmer by at least
two points along the frame pipe. Avoid securing
the trimmer by the engine, cutting head/gear
case or handle area. The trimmer should be
secured in a horizontal position, with the engine
upright as shown.
The trimmer may be secured by suitable clamps,
hangers or straps. Secure the trimmer by at least
two points along the frame pipe. Avoid securing
the trimmer by the engine, cutting head/gear
case or handle area. The trimmer should be
secured in a horizontal position, with the engine
upright as shown.
Don't hang the trimmer by the gear case or
cutting head, or they may be damaged.
cutting head, or they may be damaged.