Honeywell Q179A ユーザーズマニュアル
PRODUCT DATA
60-2032-05
Q179A,B Gas Pilot Burner
Assemblies
Assemblies
GENERAL
Q179A,B Gas Pilot Burner Assemblies use the flame
rectification principle to prove the flame. Q179A,B are used in
conjunction with a suitable electronic flame safeguard control
on industrial or commercial gas and gas pilot ignited oil
burners.
rectification principle to prove the flame. Q179A,B are used in
conjunction with a suitable electronic flame safeguard control
on industrial or commercial gas and gas pilot ignited oil
burners.
•
Q179A is a gas pilot assembly with a flame electrode
(rod) and ignition electrode, making it suitable for
applications requiring an interrupted or intermittent
electrically ignited gas pilot burner.
(rod) and ignition electrode, making it suitable for
applications requiring an interrupted or intermittent
electrically ignited gas pilot burner.
•
Q179A1183 is an “I” port burner with an ignition
electrode (spark) only.
electrode (spark) only.
•
Q179B has only the flame electrode and is suitable for
use in continuous pilot applications.
use in continuous pilot applications.
•
Primary aerated type burner is equipped with stainless
steel fins that provide the proper flame rod area to
ground area ratio for maximum flame signal and flame
stabilization.
steel fins that provide the proper flame rod area to
ground area ratio for maximum flame signal and flame
stabilization.
•
Stainless steel electrode(s) are mounted in ceramic
insulators, which permit electrode adjustment.
insulators, which permit electrode adjustment.
Contents
Ordering Information ........................................................
2