honda-automobiles accord 08e51-sda-100 ユーザーズマニュアル
22
© 2002 American Honda Motor Co., Inc. - All Rights Reserved.
Remote Control Code Programming (Only vehicles not equipped with Standard Keyless Entry System)
12
Press the LOCK or UNLOCK button on
the remote control transmitter. Observe
that:
• The status LED illuminates
the remote control transmitter. Observe
that:
• The status LED illuminates
simultaneously for 1 second to
indicate programming mode.
indicate programming mode.
• To terminate the programming mode,
turn the ignition key to the LOCK (0)
position or leave the remote’s button
untouched for more than 10 seconds.
To program each remote control
transmitter, do steps 2 thru 12.
position or leave the remote’s button
untouched for more than 10 seconds.
To program each remote control
transmitter, do steps 2 thru 12.
or
NOTE: Perform step 13 within 10
seconds for each remote or else the
programming mode will terminate.
seconds for each remote or else the
programming mode will terminate.
Press the LOCK button of each remote
(one at a time) to be stored in memory.
Observe that:
• The status LED illuminates
(one at a time) to be stored in memory.
Observe that:
• The status LED illuminates
simultaneously for 1 second to
confirm each entry.
confirm each entry.
• A button on each remote control
transmitter to be programmed must
be pressed.
be pressed.
NOTE: Only three remotes can be
stored in the system’s memory.
stored in the system’s memory.
13
12
13