OKI network 7120e ユーザーズマニュアル
OkiLAN 7120e Network User’s Guide
12
>
NetBEUI
>
SNMP
>
SMTP
>
Maintenance
>
Printer Port
The following section explains each tab’s functionality. Depending on your
printer, some items in the following explanation may not be displayed.
printer, some items in the following explanation may not be displayed.
General Tab
This allows you to set or change the root password used for Admin
Manager and FTP.
Manager and FTP.
TCP/IP Tab
This allows you to configure TCP/IP related items.
Location
Comments
Change root
password
password
You can set/change the root password for
AdminManager and FTP.
AdminManager and FTP.
Location
Comments
Use TCP/IP
Protocol
Protocol
Set TCP/IP protocol as enabled/disabled.
Use DHCP/
BOOTP
BOOTP
Check this item if IP address, subnet mask, default gateway
and IP addresses for DNS primary server and secondary
servers are retrieved from the DHCP or BOOTP server.
Otherwise, uncheck.
and IP addresses for DNS primary server and secondary
servers are retrieved from the DHCP or BOOTP server.
Otherwise, uncheck.
Use RARP
Check this item if IP address is retrieved from the RARP
server. Otherwise, uncheck.
server. Otherwise, uncheck.
IP Address
Set the IP address of the selected network interface card.
Subnet Mask Set the subnet mask of the selected network interface card.
Default
Gateway
Default
Gateway
Set the default gateway of the selected network interface
card.
card.
Use FTP/LPD
Banner
Banner
Check this item if you want to add the FTP/LPD banner.
Otherwise, uncheck.
Otherwise, uncheck.
DNS Server... Set IP addresses for DNS primary and secondary servers.