OKI network 7120e ユーザーズマニュアル

OkiLAN 7120e Network User’s Guide

22

Page Width

Set page width when data is sent to 
sjis/euc logical printer port. If the 
width of one line exceeds this value, 
Carriage Return and Line Feed are 
inserted automatically. The options 
available are from 0 to 255 (default 
78). The value 0 means no limitation 
of the line width.

Page Length

Set page length when data is sent to 
sjis/euc logical printer port. If the 
width of one line exceeds this value, 
Carriage Return and Line Feed are 
inserted automatically. The options 
available are from 0 to 255 (default 
66). The value 0 means no limitation 
of the page length.

Parallel Port 
Detail…

Bi-directional 
Mode

Set the interface mode between 
OkiLAN 7120e and the printer. 
Normally no need to change this 
setting. Leave at 1284-Std.
As bi-directional printing is not 
performed when Compatible is set, 
the printer status and menu setting 
cannot be retrieved, but print jobs 
can be sent to the printer. The 
1284-ECP mode is the same as 
1284-Std for currently supported 
printers.

Centronics I/F 
Timing

Adjust Centronics interface timing 
between the OkiLAN 7120e and the 
printer when 1284-Std or 
Compatible mode is set in 
bi-directional mode. There is 
normally no need to change this 
setting. Keep at NORMAL for 
currently supported printers.