OKI network 7120e ユーザーズマニュアル

OkiLAN 7120e Network User’s Guide

7

From this the Ethernet address is: 00:80:92:12:34:56
Restrictions

1. The printer can not receive data from either the Centronics or 

the USB interfaces with OkiLAN 7120e installed. To use these   

remove OkiLAN 7120e.

2. Set "Buffer Print" in the printer menu "I-Prime". Missing data 

or other unexpected problem occurs when anything else 

("Invalid" or "Buffer Clear") is selected.

3. When the printer is off-line, the status displayed on WEB/

AdminManager/TELNET may not be correct.

4. The link address is the same.

5. When large amounts of data are sent via FTP or IPP, time out 

may occur on the application side.

You can configure the OkiLAN 7120e by using one of the following 
methods:

Quick Setup Configure the OkiLAN 7120e 

easily and simply without 
installing any software 
packages into your system. 
You can set the following: 

Enable/disable TCP/IP, 
NetWare, EtherTalk, NetBEUI 
protocols.

>

Set IP address, Subnet Mask 

and Gateway for TCP/IP 

manually or by using DHCP.

>

Set NetWare Mode and create 

Queue/Print Server/Printer 

objects.

Windows95/98/Me/NT4.0/
2000/XP (TCP/IP protocol or 
IPX/SPX protocol should be 
installed).
To create a NetWare queue, 
NetWare Client 32 or 
IntranetWare Client should 
be installed in your system.