OKI c 130n ユーザーズマニュアル

68 - C130n User’s Guide

Select paper with high opacity for duplex (double sided) printing. Opacity 
refers to how effectively paper blocks out what is written on the opposite side 
of the page. If the paper has low opacity (high translucency), then the printed 
data from one side of the page will show through to the other side. Check 
your application for margin information. For best results, print a small quantity 
to make sure the opacity is acceptable.

Duplex (Double sided) printing can be done automatically with the duplex 
option installed and selected.

autoduplexed. See “Print Media” on page 53.

 

 
Duplexing labels, postcards, thick stock, or letterhead is not 
supported.

You should verify that the duplex option is physically installed on the printer to 
successfully duplex the job.

Check your application to determine how to set your margins for duplex 

 

printing.

The following Binding Position settings are available.

If “Short Edge” is selected, the pages will be laid out to flip 
at the top.

If “Long Edge” is selected, the pages will be laid out to flip 
at the sides.

1

3

1

2

1

1

1

1

1

2

3