Outback Power Systems vfx 3232m ユーザーズマニュアル
Copyright 2003
OutBack Power Systems, Inc.
FX & VFX Series Inverter/Charger System Installation & Programming Manual
19009 62
nd
Ave NE, Arlington WA 98223 USA
900-0027-1
Tel 360 435 6030 Fax 360 435 6019
Rev 7.2
08/26/05
Page 35
MATE - SYSTEM CONTROLLER AND DISPLAY
OUTBACK MATE
System Controller and Display
Dedicated
Inverter
Control
“HOT” Key
Inverter
Control
“HOT” Key
Inverter
LED Indicator
(green)
LED Indicator
(green)
AC Input
LED Indicator
(yellow)
Dedicated
AC Input
Control
“HOT” Key
“Soft” Keys
Each one of the soft keys corresponds to a word
on the bottom line of the LCD display
The menu system displayed on the MATE will vary depending on the software version that the MATE was
programmed with at the time of manufacturing or during its last software upgrade. For your particular menu system,
consult your MATE manual.
programmed with at the time of manufacturing or during its last software upgrade. For your particular menu system,
consult your MATE manual.
The following pages show the portion of the menu structure that relates to the FX. Most of the menu will be
consistent no matter what type of FX you have purchased. The MATE displays that follow are from the most current
MATE being sold by OutBack Power Systems.
consistent no matter what type of FX you have purchased. The MATE displays that follow are from the most current
MATE being sold by OutBack Power Systems.
The DC voltage values (the letters “vdc” usually follow these values) shown in the following MATE displays will be the
default values for a 12V version of the FX. For the 24V version, multiply these values by 2. For the 48V version,
multiply these values by 4. This multiplication process must be performed for the incremental values as well. When
changing a voltage setting you will use the ‘increment’ (INC) or ‘decrement’ (DEC) buttons. For example, for a 12V
FX the increment value is 0.1V. A 24V FX has an incremental value of 0.2V and a 48V FX has an incremental value
of 0.4V.
default values for a 12V version of the FX. For the 24V version, multiply these values by 2. For the 48V version,
multiply these values by 4. This multiplication process must be performed for the incremental values as well. When
changing a voltage setting you will use the ‘increment’ (INC) or ‘decrement’ (DEC) buttons. For example, for a 12V
FX the increment value is 0.1V. A 24V FX has an incremental value of 0.2V and a 48V FX has an incremental value
of 0.4V.
All values displayed in the “Setup” and “Advanced” menus are the default values unless otherwise stated.
For “M” versions of the MATE (example: MATE 2”M”), only the “Status” and “Advanced” menus are the same as non-
“M” versions of the MATE. If you are using an “M” version of the MATE, please consult the MATE manual for proper
navigation and screen information.
“M” versions of the MATE. If you are using an “M” version of the MATE, please consult the MATE manual for proper
navigation and screen information.