Viewsonic VG900 ユーザーズマニュアル

• Make sure both the LCD display and 

computer are turned OFF 

• Connect the video cable from the LCD 

display to the computer

Macintosh users: Models older than G3 
require a Macintosh adapter. Attach the 
adapter to the computer and plug the video 
cable into the adapter.

To order a ViewSonic

®

 Macintosh adapter, 

contact ViewSonic Customer Support.

Turn ON the LCD display, then turn ON the 
computer. This sequence (LCD display 
before computer) is important.

NOTE: Windows users may receive a 
message asking them to install the INF file. 
This is on the CD.

Follow the on-screen instructions

If your computer does not have a CD-ROM 
drive, see “Customer Support."

(1) Wait for the CD-ROM to auto-start.

NOTE: If the CD-ROM does not auto-start: 
double-click on the CD-ROM icon in the 
Windows Explorer, then double-click on 
viewsonic.exe.

(2) Follow the on-screen instructions.

Speakers: Connect the audio cable (lime-
colored) to the AUDIO OUT port of your 
computer’s sound card, then to the LCD 
display’s AUDIO IN port (see illustration 
below).

Example: 1280 x 1024 @ 60 Hz.

For instructions on changing the resolution 
and refresh rate, see the graphic card’s user 
guide.

To be best prepared for any future customer 
service needs: print this user guide and write 
the serial number in "For Your Records" on 
page 2. (See back of LCD display.) 

You can register your product online at the 
website for your region. See the Customer 
Support table in this guide.

The ViewSonic Wizard CD-ROM also 
provides an opportunity for you to print the 
registration form which you may mail or fax 
to ViewSonic. 

AC outlet 
(wall socket)

AC power cord

Computer power cord

Audio cable

Video cable

Back plate #1

Back plate #2

Audio OUT

AC/DC power adapter

DC power cord

Audio IN

Video IN (analog)

DC power IN

Kensington
lock

   VG900_VG900b