Uniden BC246T ユーザーズマニュアル

41

All systems preprogrammed into the scanner are 
assigned to quick key 9. To turn the preprogrammed 
systems on or off, simply press 9 while scanning.

You can scan preprogrammed systems more efficiently 
by preventing the BC246T from scanning systems that 
are not in your area. There are three ways to do this:

• Lock out the faraway systems (see “Locking/Unlock-

ing Systems” on Page 42).

• Reassign your local systems to another quick key 

(see “Editing the System Quick Key” on Page 62).

• Delete the faraway systems (see “Deleting Systems” 

on Page 69).  

Important: You cannot restore preprogrammed 
systems if you delete them.

To select systems to scan, press Scan then press the 
number button corresponding to the quick key assigned 
to the system or systems. To stop scanning the 
system(s), press the number button again.

The SYS indicators on the display show the systems that 
are currently selected.

To select or lock out a system that is not assigned to a 
key, press and hold 

 while you rotate the scroll 

control until the desired system is selected. Then, 
continue to hold 

 and press L/O to either lock out or 

unlock the system.

Within a system, you can assign groups of channels to a 
group quick key (see “Setting the Group Quick Key” on 
Page 70). 

Follow these steps to activate or deactivate a channel 
group within a system while scanning.