KVH Industries kvhtracvision g4 ユーザーズマニュアル

Maintenance Port Parser Commands

54-0147

The TracVision G4 system parser commands are parsed when the
system receives an ASCII carriage return (Hex 0D). An ASCII line
feed (Hex 0A) is permitted but is ignored in any transmitted
command. All system responses are terminated with an ASCII
carriage return followed by a line feed and ending with either an
acknowledge character (ASCII > (Hex 3E)) or a not-acknowledge
character (ASCII ? (Hex 3F)). The parser commands are shown
below in boldface capital letters but they are not case-sensitive. In
most cases, the command is responded to with an echo; that is, if
you type 

, for example, and press “ENTER” the response

will be the command you have entered. For other commands, the
response is specific for each command, such as 

,

or 

.

Function:

reports software version and system type

Command:

Response:

KVH TracVision G4 Rev X - Version X.XX - 
XXX Motors

Function:

reports general system status

Command:

Response:

system status string

Function:

initializes the system (performs a soft reset)

Command:

Response:

echoes the command, then reinitializes the system