VTech vt2650 ユーザーズマニュアル
33
Additional Information
You Hear Noise In The Handset, And None Of The Keys Or Buttons
Work
Work
Make sure the power cord is plugged in.
Common Cure For Electronic Equipment
If the unit does not seem to be responding normally, then try putting the Handset in the
cradle. If it does not seem to respond, do the following (in the order listed):
1. Disconnect the power to the Base.
2. Disconnect the Handset battery cells.
3. Wait a few minutes.
4. Connect power to the Base.
5. Re-install the battery cells.
6. Watch for Handset to display: "VTECH" or your own handset name.
cradle. If it does not seem to respond, do the following (in the order listed):
1. Disconnect the power to the Base.
2. Disconnect the Handset battery cells.
3. Wait a few minutes.
4. Connect power to the Base.
5. Re-install the battery cells.
6. Watch for Handset to display: "VTECH" or your own handset name.
Your Answering System Is Not Recording Messages
• Make sure system is turned on (the
ANSWER ON/OFF
key is illuminated).
• Make sure
Announce Only
feature is set to
OFF
.
You Cannot Hear Recorded Messages
• Using the Base volume control, raise the volume to a comfortable listening level.
CL Is Flashing In The Base Message Window Display:
• You need to set the day and time. Refer to the section(s) on Set The Clock in this
User's Manual
In Case Of Difficulty